§ TOOL · KPV CALCULATORLive lab data
Reconstitution & conversion

KPV Dosage Calculator

Enter vial size, bacteriostatic water volume and a quantity per administration to get concentration, syringe units and draws per vial. KPV has no established dose — this page does the arithmetic, not the recommendation. The compound itself is covered in the KPV peptide guide.

A 10 mg vial of KPV reconstituted with 2 mL of bacteriostatic water gives a concentration of 5 mg/mL, or 50 mcg per unit on a U-100 syringe. For a 1 mg quantity, draw the syringe to 20 units (0.20 mL). At that quantity the vial provides about 10 draws. KPV has no established dose; this is arithmetic on a quantity you supply.

§ Interactive calculatorLive lab data
KPVPre-locked

1Your vial

How many mg is on the label?
mg

2Water you'll add

Bacteriostatic water (more water = bigger, easier-to-read draw)
mL

3Your dose

How much per shot? in mcg
mcg

4Your syringe

5 mg vialfill it to here
0204060801005
1.0 mL (100u)pull plunger to the line

Draw the syringe up to

5 units (0.05 mL)

That's one 250 mcg dose. Add 1 mL of water to your 5 mg vial first.

5 mg/mLStrength
50 mcgPer unit
20Doses / vial

What Peptigrity has on KPV

99.57%Average tested purity
267Lab tests on file
228Shops listed

Educational tool for research use. Not medical advice — it calculates what you enter, it doesn't recommend a dose.

Why this calculator will not give you a KPV dose

KPV is a three-amino-acid peptide, Lys-Pro-Val, the C-terminal fragment of α-MSH at roughly 342 daltons. Its anti-inflammatory activity is documented in mouse models, not in people: no human clinical trial of KPV has been published as of August 2026, and none has established a quantity by any route. That is why the input above is a reference quantity. A calculator that printed a KPV dose would be inventing the one number the evidence does not supply.

QuestionWhat the compound page statesEvidence level
What is KPV?The C-terminal tripeptide of α-MSH, α-MSH(11-13); sequence Lys-Pro-Val; molecular weight ~342 DaChemical identity
How does it act?Inhibits NF-κB signalling, reduces pro-inflammatory cytokine production, and modulates immune cell functionMechanism, preclinical
What has been shown?In murine models, KPV produced significant anti-inflammatory effects in two models of colitisAnimal model
Why might oral work?Its small size and uptake by the intestinal peptide transporter PepT1 give it more plausible oral activity than longer peptides; orally administered KPV reduced colitis in mouse modelsAnimal model, mechanism
Human trials?No human clinical trials of KPV have been published as of August 2026None
An oral dose?There are no human trials establishing an oral dose or effectNone
A recommended dose?Does Peptigrity recommend a KPV dose? NoNone — declined
Routes in the marketInjectable, oral and topical formulations are all represented in research-grade vendor marketsMarket observation, not efficacy

KPV's evidence base is preclinical and murine — two colitis models, IBD, skin-barrier and periodontal work — with no published human clinical trial as of August 2026, no established oral dose or effect, long-term safety uncharacterised, and no Peptigrity dose recommendation. Injectable, oral and topical formulations all exist in the vendor market; this page calculates for the injectable route only, because units on a U-100 syringe is a subcutaneous-injection question and the arithmetic has no meaning for a capsule or a cream.

KPV quantity-to-units conversion

KPV draw volumes depend entirely on the concentration you mixed and the quantity you intend. At the default of 5 mg/mL, 250 mcg is 5 units, 500 mcg is 10 units, 1 mg is 20 units and 2 mg is 40 units — all comfortably inside a 1 mL U-100 barrel. The table below is a conversion grid, not an escalation ladder.

Quantity per administrationDraw at 5 mg/mLVolumeDraws from a 10 mg vialDraws from a 30 mg vial
250 mcg5 units0.05 mL40120
500 mcg10 units0.10 mL2060
1 mg (page reference)20 units0.20 mL1030
2 mg40 units0.40 mL515
5 mg100 units1.00 mL26

These rows are arithmetic reference points spanning the range a U-100 syringe reads well at this concentration. They are not tiers, not a schedule, and not doses. No trial, label or Peptigrity guidance establishes a KPV quantity. In sentences: 250 mcg — draw 5 units (0.05 mL) at 5 mg/mL, and a 10 mg vial gives 40 such draws. 500 mcg — 10 units (0.10 mL), 20 draws. 1 mg — 20 units (0.20 mL), 10 draws. 2 mg — 40 units (0.40 mL), 5 draws. 5 mg — 100 units (1.00 mL), which fills a 1 mL barrel exactly, 2 draws.

At 5 mg/mL a 250 mcg quantity is 5 units, and a misread of one unit is a 20% error on the amount drawn. If you are working at the small end of this grid the fix is more diluent, not a steadier hand: the same 250 mcg from a 10 mg vial in 5 mL is 12.5 units, which is a reading a person can actually make. Arithmetic, shown: at 2 mg/mL, 250 mcg ÷ 20 mcg per unit = 12.5 units.

Units at three concentrations

KPV vials in the tracked market run from 4 mg to 80 mg, so the same quantity can land anywhere on the barrel depending on which vial you hold and how much water you added. Read down the column for your concentration, not across — a units figure carried from one concentration to another is simply wrong.

QuantityAt 2 mg/mL (10 mg + 5 mL)At 5 mg/mL (10 mg + 2 mL)At 10 mg/mL (10 mg + 1 mL)
250 mcg12.5 units5 units2.5 units
500 mcg25 units10 units5 units
1 mg50 units20 units10 units
2 mg100 units40 units20 units
5 mg— exceeds a 1 mL barrel (250 units)100 units50 units

Every cell is the same arithmetic: units = (quantity mg ÷ concentration mg/mL) × 100. At 10 mg/mL every quantity in this grid up to 5 mg fits inside a single 1 mL U-100 barrel; at 2 mg/mL only quantities up to 2 mg do, and quantities at or below 250 mcg become hard to read accurately at the higher concentrations.

How to reconstitute KPV

KPV reconstitution is a choice, not a recipe. No approved label sets a diluent volume for KPV and no source page states one, so the volume you pick is the one that puts your intended quantity in a readable part of the syringe. The decision with real consequences is resolution: a 10 mg vial in 1 mL puts a 250 mcg draw at 2.5 units, where a misread of one unit is a 40% error. Technique is covered once, elsewhere: reconstituting peptides step by step and the bacteriostatic water guide.

How long a KPV vial lasts

A KPV vial lasts as many administrations as the label mass divided by the quantity per administration — the water volume changes nothing about it. The grid counts draws, not weeks: convert to a duration yourself, because this page states no frequency. No source establishes how often KPV is administered.

Vial sizeAt 250 mcgAt 500 mcgAt 1 mgAt 2 mgAt 5 mg
4 mg16 draws8 draws4 draws2 draws
5 mg20 draws10 draws5 draws2.5 draws1 draw
10 mg40 draws20 draws10 draws5 draws2 draws
30 mg120 draws60 draws30 draws15 draws6 draws
80 mg320 draws160 draws80 draws40 draws16 draws

Arithmetic: draws per vial = vial mg ÷ quantity mg. A 10 mg KPV vial gives about 10 draws at 1 mg per administration. A 30 mg vial gives about 30 at the same quantity. A 4 mg vial gives about 4. An 80 mg vial gives about 80. Multiply by your own frequency to get a duration; this page does not supply one.

Regulatory status

KPV is not approved for any medical indication anywhere in the world as of May 2026, and it is sold as a research-use-only compound. Its regulatory position moved twice in 2026 and neither move was an approval: on 22 April 2026 the FDA removed KPV from its Category 2 bulk drug substances list, a procedural step, and at the Pharmacy Compounding Advisory Committee meeting of 23–24 July 2026 the committee voted 8–6–1 to recommend KPV for the 503A compounding bulks list. FDA scientific staff opposed that recommendation, the committee's role is advisory, and the agency has not finalised anything.

KPV is legal as a research chemical for laboratory use in most jurisdictions but is not approved for human consumption. Other compounds in the same category: other immune-support compounds. Independent test records: KPV lab test records. Tracked prices: KPV price per milligram.

Related tools

Most-tested peptides

Frequently asked questions

How many units is 1 mg of KPV?

It depends on the concentration. At the page default of 5 mg/mL (10 mg vial + 2 mL), 1 mg is 20 units on a U-100 syringe. At 10 mg/mL it is 10 units, and at 2 mg/mL it is 50 units. A units figure quoted without a concentration cannot be used.

What is the standard KPV dose?

There isn't one. No human clinical trial of KPV has been published as of August 2026, no trial has established a quantity by any route, no regulator has approved a dose, and Peptigrity does not recommend one. This calculator converts a quantity you supply into units on a syringe. It does not supply the quantity.

How much BAC water should I add to a 10 mg KPV vial?

There is no standard volume and no label to specify one, so the choice is yours. 1 mL gives 10 mg/mL, 2 mL gives 5 mg/mL and 5 mL gives 2 mg/mL. Pick the one that puts your intended quantity in a readable part of the barrel rather than down at two or three units.

Can KPV be taken orally?

Its small size — three amino acids, about 342 daltons — and its uptake by the intestinal transporter PepT1 make oral activity more plausible than for longer peptides, and orally administered KPV reduced colitis in mouse models. That evidence is preclinical: there are no human trials establishing an oral dose or effect. This calculator covers injectable arithmetic only.

Does the July 2026 FDA vote mean KPV is approved?

No. The Pharmacy Compounding Advisory Committee voted 8–6–1 in July 2026 to recommend KPV for the 503A compounding bulks list, but FDA scientific staff opposed it, the committee is advisory, and the agency has not finalised anything. KPV is not approved for any medical indication anywhere in the world.

Does a clean lab test mean my KPV vial holds 10 mg?

No. The indexed tests establish high chemical purity, but net content is a separate measurement and recent tested quantities run from 9.48 mg to 12.21 mg against a 10 mg label. A certificate confirms identity and purity; it does not confirm the amount in your particular vial.

This calculator is for educational and research purposes only and does not constitute medical advice. Doses shown on this page are commonly cited research figures, presented as reference. Compounds discussed may be investigational and not approved for human use. Consult a qualified healthcare provider. Peptigrity is an independent review platform and does not sell, endorse or recommend specific products or vendors. KPV is not approved by the FDA or any major Western regulator for human use. KPV has no established dose: no human clinical trial of KPV has been published, no trial has established a quantity by any route, and Peptigrity does not recommend a KPV dose.