ForumApex Peptides and the North Sioux City search: what's confirmed and what buyers can check· Shop talk · last reply 2 h ago

FreeNo sign-upNo subscriptionNo affiliate links

Glutathione Dosage Calculator

Enter vial size and diluent volume to get concentration and draw volume. Peptigrity publishes no glutathione dose, so you supply the amount — the compound itself is covered in the glutathione compound guide.

A 1,500 mg vial of Glutathione reconstituted with 10 mL of bacteriostatic water gives a concentration of 150 mg/mL, or 1.5 mg per unit on a U-100 syringe. Each 1 mL drawn contains 150 mg, and a full 100-unit U-100 barrel holds 150 mg — so any amount above 150 mg is more than one barrel at this concentration. Peptigrity does not publish a glutathione dose, so the doses-per-vial figure appears only once you enter your own amount: doses per vial = 1,500 mg ÷ your amount in mg.

Defaults: 1,500 mg is the largest listed vial and the one behind the lowest tracked $/mg. Peptigrity publishes no glutathione dose, so the dose field starts empty. Enter yours and the calculator picks the water.

Interactive calculatorLive lab data
GlutathionePre-locked

1Your vialNew · use the lab-measured amount

How many mg is on the label?

mg
Have the lot number? We’ll use what the lab measured instead of the label.

2Water

Bacteriostatic water — not sure how much? Let the calculator pick.

mL
The size of the glass bottle — not the mg on the label. Small peptide vials often hold only 2–3 mL.

3Your dose

How much per shot?

4Which syringe do you have?

Pick the one in your hand.

Not sure? Look at the biggest number printed on the barrel — 30, 50 or 100.

Check the box says U-100. Syringes for pet insulin (U-40) look the same but their lines measure 2.5× more liquid. This calculator is for U-100 syringes only.

Enter your dose and the calculator picks the water.
Then, each dose: pull the plunger back to
—units
on your 1 mL syringe
Close-up of your syringeblack numbers are printed on the syringe · gray ones are our count
024681012141618202224Line up this edge with —the edge of the black stopper nearest the needle
The whole syringe1 mL · a line every 2 units
102030405060708090100

Each line on this syringe = 2 units = 3 mg.

Each unit holds
1.5 mg
Doses in this vial
—
Mixed strength
150 mg per mL

Easy check: 10 units = 15 mg · 20 units = 30 mg

What Peptigrity has on Glutathione

99.51%Average tested purity
142Lab tests on file
346Shops listed

Educational tool for research use. Not medical advice — it calculates what you enter, it doesn't recommend a dose.

Track your Glutathione protocol

Log it week by week in the free peptide tracker and check your vial's lot against lab tests on file. Private until you publish.

Where every glutathione dose figure comes from

Nowhere, and that is the finding. Glutathione has no dose figure in our verified fact base. The compound page carries no dosing section, no vial size, no reconstitution volume, no frequency and no half-life, and it answers the dose question explicitly with “No. Peptigrity is an independent review platform, not a medical authority.” A calculator that filled that gap with a plausible number would be inventing the single figure the evidence does not supply.

The 10 mL is a display default, not a recommendation. It was chosen so the arithmetic above has something to demonstrate on the largest tracked vial. No source states a diluent volume for glutathione, so change it to whatever you are actually working with and read the concentration off your own numbers.

Why glutathione's vial size changes the instrument, not just the number

Every other calculator in this suite works in micrograms or single-digit milligrams, where a U-100 insulin syringe is the natural instrument. Glutathione does not: tracked vials run from 500 mg to 1500 mg, and at the reference concentration a full 100-unit barrel holds 150 mg. Anything above that is more than one barrel. This page therefore leads with millilitres and treats syringe units as a secondary output.

VialIn 10 mLConcentrationmg per 1 mLmg in a full 100-unit barrel
500 mg10 mL50 mg/mL50 mg50 mg
600 mg10 mL60 mg/mL60 mg60 mg
1200 mg10 mL120 mg/mL120 mg120 mg
1500 mg (reference)10 mL150 mg/mL150 mg150 mg

Arithmetic, shown: concentration = vial mg ÷ diluent mL; a U-100 barrel is 1 mL, so a full barrel carries exactly the mg in 1 mL. A 500 mg vial in 10 mL is 50 mg/mL, so 1 mL carries 50 mg. A 1500 mg vial in 10 mL is 150 mg/mL, so 1 mL carries 150 mg. Vial sizes are the four tracked on the glutathione price page.

How to reconstitute glutathione

No source in our fact base states a diluent, a diluent volume, a dissolution time, a storage temperature or an in-use period for glutathione. That is a genuine gap and it is printed here rather than filled with a figure borrowed from another compound — a peptide's 2–8 °C and 28-day convention is not transferable without a source. The general procedure, where one is established, is at reconstituting peptides step by step, and the diluent question at the bacteriostatic water guide.

How long a glutathione vial lasts

As many draws as the vial mass divided by your amount — the diluent volume changes nothing about it. This page cannot fill the table in, because it has no amount to divide by. The arithmetic is doses per vial = vial mg ÷ amount mg: a 1500 mg vial gives 15 draws at 100 mg, 6 at 250 mg and 3 at 500 mg. Those are illustrations of the arithmetic, not suggestions of an amount.

Regulatory status

Glutathione is not FDA-approved as a stand-alone therapeutic for any specific indication, though it is incorporated into multiple approved clinical protocols. Research-grade glutathione sold by third-party laboratories is not a prescription product and is supplied for research use only.

Independent test records: glutathione lab test records. Tracked prices: glutathione price per milligram. What shop COAs show, compound by compound: COA benchmarks.

Related tools

Most-tested peptides

Frequently asked questions

What is the standard glutathione dose?

We do not publish one. The glutathione compound page carries no dosing section and answers the question directly: “No. Peptigrity is an independent review platform, not a medical authority.” This page converts a vial size and a diluent volume into a concentration and a draw volume. You supply the amount.

How much BAC water should I add to a glutathione vial?

No source in our fact base states a reconstitution volume for glutathione. The 10 mL this page shows is a display default, picked so the arithmetic has something to demonstrate on a 1500 mg vial. Change it to whatever you are actually using — the concentration follows from your own numbers.

Why does this page lead with millilitres instead of syringe units?

Because of the mass involved. At 150 mg/mL a full 100-unit U-100 barrel holds 150 mg, so anything above 150 mg is more than one barrel. Glutathione vials run 500–1500 mg, which makes an insulin syringe the wrong instrument for most amounts and millilitres the honest unit.

Is glutathione FDA-approved?

Not as a stand-alone therapeutic for any specific indication, though it is incorporated into multiple approved clinical protocols. Research-grade glutathione sold by third-party laboratories is not a prescription product.

How many doses does a glutathione vial hold?

That depends entirely on the amount you use, and this page has no amount to assume. The arithmetic is simply vial mg ÷ your amount in mg — a 1500 mg vial gives 15 draws at 100 mg, or 3 at 500 mg. Enter your own figure and the calculator completes it.

Does a clean lab test tell me my vial holds what the label says?

No. A certificate confirms identity and purity; net content is a separate measurement. The two answer different questions, and a high purity figure says nothing about the mass in your particular vial.

This calculator is for educational and research purposes only and does not constitute medical advice. It converts quantities you enter; no dose is shown or implied on this page. Compounds discussed may be investigational and not approved for human use. Consult a qualified healthcare provider. Peptigrity is an independent review platform and does not sell, endorse or recommend specific products or vendors. Glutathione is not FDA-approved as a stand-alone therapeutic for any specific indication. Peptigrity publishes no glutathione dose: no dose figure, frequency or reconstitution volume exists in our verified fact base, and this page does not supply one.