Pinealon 10mg lab test from BioEdge Research Labs, August 2026
Kovera Labs tested Pinealon 10mg from BioEdge Research Labs on Aug 3, 2026. It measured 99.893% purity and 10.66 mg against 10 mg on the label.
- In the vial
- 10.66 mgThe label says 10 mg, so 7% more.
- Tested by
- Kovera Labs
- Tested on
- Lot
- 04012026PIN10
Confirmed on Kovera Labs' portal · checked Aug 3, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
INT5MGRSample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 80 Pinealon lab tests →Pinealon pricesBioEdge Research Labs reviews and all 104 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.893% | How much of what's in the vial is the target compound |
| Amount in the vial | 10.66 mglabel says 10 mg · 7% more | Whether you get the amount on the label |
| Endotoxin | ≤ 0.5 EU/mL · pass | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | As, Cd, Pb, Hg — all Negative | Could there be metal contamination? |
| Container | Lyophilized Powder / Black Cap / Silver Crimp | |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: sterility. It may still be on the certificate below. If it isn't there either, this test says nothing about it.
What’s in the vial
Label 10 mg · Lab measured 10.66 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 7% more means in a syringe
107% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.7 mg using the measured mass, against 2.5 mg on the label — 7% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | KVR-2026-124C3D |
|---|---|
| On the lab's portal | ✓ Confirmed Aug 14, 2026A Peptigrity staff member found this report on the laboratory's own public portal.date taken from the record, not from a logged check |
| Checked by | Peptigrity staff, against the lab's portal |
| What the portal shows | That the report is validKovera Labs' portal doesn't show the numbers, so they can't be compared there. |
| Counts as | One lab testCounts toward BioEdge Research Labs' Trust Score until Aug 3, 2028. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | Peptigrity Team Member 02 · Peptigrity team · filed Aug 14, 2026 |
Independent HPLC purity analysis of Pinealon from BioEdge Research Labs, performed by Kovera Labs on August 3, 2026. Reported purity: 99.893%. Net content: 10.66 mg against 10 mg labeled (107% of label). Endotoxins: PASS (≤0.5 EU/mL). Heavy metals: As, Cd, Pb, Hg — all Negative. Batch 04012026PIN10. Sample source: shop-provided. Certificate of analysis attached.
Other lots of Pinealon from BioEdge Research Labs
| Lot | Tested | Lab | Purity | vs label | Lab's portal |
|---|---|---|---|---|---|
| 260114PI103 | Jan 23, 2026 | MDx BioAnalytical Laboratory | 99.27% | 101% of label | ✓ Confirmed |
| 260105PI103 | Jan 13, 2026 | MDx BioAnalytical Laboratory | 99.74% | 102% of label | ✓ Confirmed |
Batches this shop has published a certificate for, newest first. A lot whose printed value cannot identify a batch is not listed.
Related lab tests
The 79 other Pinealon tests on Peptigrity have a typical purity of 99.65%. This one is 99.893%.

Community discussion