Forumslovakia doping bust: 13 detained, 80+ kinds of peptides and two labs seized · Shop talk · 3 replies

Tesamorelin 10mg supplier's lab test, sold by Bulk Aussie Peptides, June 2026

Janoshik Labs tested Tesamorelin 10mg from Bulk Aussie Peptides on Jun 8, 2026. It measured 98.494% purity and 9.91 mg against 10 mg on the label.

HPLC purity
98.494%
✓ Excellent
Excellent means 98% or higher.
In the vial
9.91 mgThe label says 10 mg, so 1% less.
Tested by
Janoshik Labs
Tested on
Lot
2026-05
See the certificate ↓

Confirmed on Janoshik Labs' portal · checked Jun 8, 2026

Peptigrity looked this report up on the lab's own site and it's there. You can check it too.

The portal confirms the certificate. It can't show that a vial you buy from Bulk Aussie Peptides is from this batch — compare the lot on yours.

Lookup codeUY1PW6RP67I3

Sample source: supplier-provided. Bulk Aussie Peptides' supplier had this batch tested before it reached Bulk Aussie Peptides, and Bulk Aussie Peptides passed the certificate on. How we weigh evidence →

Test results

what the lab measured
TestResultWhat it tells you
Purity (HPLC)98.494%How much of what's in the vial is the target compound
Amount in the vial9.91 mglabel says 10 mg · 1% lessWhether you get the amount on the label
EndotoxinNot recordedIs it safe to inject? Checks for bacterial toxins
Heavy metalsNot recordedCould there be metal contamination?
SterilityNot recordedIs it safe to inject? Checks for live bacteria or fungi

Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.

What’s in the vial

Label 10 mg · Lab measured 9.91 mg

One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.

What 1% less means in a syringe

99% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.5 mg using the measured mass, against 2.5 mg on the label — 1% less.

Certificate of analysis

Original document
Issued by Janoshik Labs · Jun 8, 2026 · Batch 2026-05

About this test

How this certificate was checked

Report number169266
On the lab's portal✓ ConfirmedA Peptigrity staff member found this report on the laboratory's own public portal.
What the portal showsThat the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there.
Submitted viaShop panel (bulk upload)
Counts asListed for information — supplier-provided, not counted
Sample sourceSupplier-providedNo vial bought from Bulk Aussie Peptides was tested. If the lot on your vial reads 2026-05, this is your batch's certificate. Supplier certificates are listed for information and don't count toward the Trust Score.
Submitted by@Bap 💬 Contributor
Summary

HPLC purity analysis of Tesamorelin sold by Bulk Aussie Peptides, ordered by its supplier and performed by Janoshik Labs on June 8, 2026. Reported purity: 98.494%. Net content: 9.91 mg against 10 mg labeled (99% of label). Batch 2026-05. Sample source: supplier-provided. Certificate of analysis attached.

Related lab tests

6 tests

Community discussion

0 comments · ♡ 0 likes

Join the discussion — sign in to leave a comment on this lab test.

Sign in to comment →

Have you tested this peptide?

Submit your third-party lab test to help the community verify purity claims. Every report is reviewed before publication.