Semax 10mg lab test from Peak Peptides, October 2025
Janoshik Labs tested Semax 10mg from Peak Peptides on Oct 27, 2025. It measured 99.531% purity and 11.85 mg against 10 mg on the label.
- In the vial
- 11.85 mgThe label says 10 mg, so 19% more.
- Tested by
- Janoshik Labs
- Tested on
- Lot
- CS-sa101018
Not checked on Janoshik Labs' portal
This certificate carries no lookup code. Janoshik Labs has a public portal, so a report with a code can be looked up there.
Sample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 335 Semax lab tests →Semax pricesPeak Peptides reviews and all 12 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.531% | How much of what's in the vial is the target compound |
| Amount in the vial | 11.85 mglabel says 10 mg · 19% more | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 10 mg · Lab measured 11.85 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 19% more means in a syringe
119% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 3 mg using the measured mass, against 2.5 mg on the label — 19% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | CS-sa101018 |
|---|---|
| On the lab's portal | Not checkedThis certificate has not been checked against the laboratory's public portal. |
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Counts as | One lab testCounts toward Peak Peptides' Trust Score until Oct 27, 2027. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | Peptigrity Team Member 02 · Peptigrity team · filed May 7, 2026 |
Independent HPLC purity analysis of SEMAX from Peak Peptides, performed by Janoshik Labs on October 27, 2025. Reported purity: 99.531%. Net content: 11.85 mg against 10 mg labeled (119% of label). Tested content exceeds the labeled amount by 19%. Batch CS-sa101018. Sample source: shop-provided. Certificate of analysis attached.
Related lab tests
The 332 other Semax tests on Peptigrity have a typical purity of 99.52%. This one is 99.531%.

Community discussion