Semax 10mg lab test from Pepspan, November 2026
Janoshik Labs tested Semax 10mg from Pepspan on Nov 2, 2026. It measured 98.311% purity and 10.56 mg against 10 mg on the label.
- In the vial
- 10.56 mgThe label says 10 mg, so 6% more.
- Tested by
- Janoshik Labs
- Tested on
- Lot
- PEP-SMX-2608-01
Confirmed on Janoshik Labs' portal · checked Nov 2, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
2MAUJHVUGRJBSample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 335 Semax lab tests →Semax pricesPepspan reviews and all 6 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 98.311% | How much of what's in the vial is the target compound |
| Amount in the vial | 10.56 mglabel says 10 mg · 6% more | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 10 mg · Lab measured 10.56 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 6% more means in a syringe
106% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.6 mg using the measured mass, against 2.5 mg on the label — 6% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | 245295 |
|---|---|
| On the lab's portal | ✓ ConfirmedA Peptigrity staff member found this report on the laboratory's own public portal. |
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Submitted via | Shop panel (bulk upload) |
| Counts as | One lab testCounts toward Pepspan's Trust Score until Nov 2, 2028. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | @Pepspan 💬 Contributor |
Independent HPLC purity analysis of Semax from Pepspan, performed by Janoshik Labs on November 2, 2026. Reported purity: 98.311%. Net content: 10.56 mg against 10 mg labeled (106% of label). Batch PEP-SMX-2608-01. Sample source: shop-provided. Certificate of analysis attached.
Related lab tests
The 332 other Semax tests on Peptigrity have a typical purity of 99.52%. This one is 98.311%.

Community discussion