Semax 10mg supplier's lab test, sold by Bulk Aussie Peptides, June 2026
Janoshik Labs tested Semax 10mg from Bulk Aussie Peptides on Jun 9, 2026. It measured 98.799% purity and 11.12 mg against 10 mg on the label.
- In the vial
- 11.12 mgThe label says 10 mg, so 11% more.
- Tested by
- Janoshik Labs
- Tested on
- Lot
- 2026-05
Confirmed on Janoshik Labs' portal · checked Jun 9, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
The portal confirms the certificate. It can't show that a vial you buy from Bulk Aussie Peptides is from this batch — compare the lot on yours.
L5BXQGHGBYU4Sample source: supplier-provided. Bulk Aussie Peptides' supplier had this batch tested before it reached Bulk Aussie Peptides, and Bulk Aussie Peptides passed the certificate on. How we weigh evidence →
All 335 Semax lab tests →Semax pricesBulk Aussie Peptides reviews and all 4 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 98.799% | How much of what's in the vial is the target compound |
| Amount in the vial | 11.12 mglabel says 10 mg · 11% more | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 10 mg · Lab measured 11.12 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 11% more means in a syringe
111% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.8 mg using the measured mass, against 2.5 mg on the label — 11% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | 169294 |
|---|---|
| On the lab's portal | ✓ ConfirmedA Peptigrity staff member found this report on the laboratory's own public portal. |
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Submitted via | Shop panel (bulk upload) |
| Counts as | Listed for information — supplier-provided, not counted |
| Sample source | Supplier-providedNo vial bought from Bulk Aussie Peptides was tested. If the lot on your vial reads 2026-05, this is your batch's certificate. Supplier certificates are listed for information and don't count toward the Trust Score. |
| Submitted by | @Bap 💬 Contributor |
HPLC purity analysis of Semax sold by Bulk Aussie Peptides, ordered by its supplier and performed by Janoshik Labs on June 9, 2026. Reported purity: 98.799%. Net content: 11.12 mg against 10 mg labeled (111% of label). Tested content exceeds the labeled amount by 11%. Batch 2026-05. Sample source: supplier-provided. Certificate of analysis attached.
Related lab tests
The 333 other Semax tests on Peptigrity have a typical purity of 99.52%. This one is 98.799%.

Community discussion