ForumRetatrutide: 1, 2 or 3 mL of BAC water — what do you use, and why? · Retatrutide · 10 replies

Retatrutide 10mg supplier's lab test, lot BTCH-PE-99-334, September 2026

Optiq Health Labs tested Retatrutide 10mg on Sep 4, 2026. The shop is withheld. It measured 99.8% purity and 9.87 mg against 10 mg on the label.

HPLC purity
99.8%
✓ Excellent
Excellent means 98% or higher.
In the vial
9.87 mgThe label says 10 mg, so 1% less.
Shop
Shop withheld
Tested on
Lot
BTCH-PE-99-334
See the certificate ↓

Optiq Health Labs has no public portal.

Only the lab can confirm this report, by email.

Sample source: supplier-provided. The shop's supplier had this batch tested before it reached the shop, and the shop passed the certificate on. How we weigh evidence →

Test results

what the lab measured
TestResultWhat it tells you
Purity (HPLC)99.8%How much of what's in the vial is the target compound
Amount in the vial9.87 mglabel says 10 mg · 1% lessWhether you get the amount on the label
Endotoxin≤ 0.05 EU/mg · passIs it safe to inject? Checks for bacterial toxins
Heavy metalsNot recordedCould there be metal contamination?
SterilityNot recordedIs it safe to inject? Checks for live bacteria or fungi

Not recorded for this test: heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.

What’s in the vial

Label 10 mg · Lab measured 9.87 mg

One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.

What 1% less means in a syringe

99% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.5 mg using the measured mass, against 2.5 mg on the label — 1% less.

Certificate of analysis

Original document
Issued by Optiq Health Labs · Sep 4, 2026 · Batch BTCH-PE-99-334

About this test

How this certificate was checked

Report number1190.OPT.260901
On the lab's portalNot checkedThis certificate has not been checked against the laboratory's public portal.
What the portal showsThat the report is validOptiq Health Labs' portal doesn't show the numbers, so they can't be compared there.
Submitted viaShop panel (bulk upload)
Counts asListed for information — supplier-provided, not counted
Sample sourceSupplier-providedNo vial bought from the shop was tested. If the lot on your vial reads BTCH-PE-99-334, this is your batch's certificate. Supplier certificates are listed for information and don't count toward the Trust Score.
Submitted byThe shop
Summary

HPLC purity analysis of GLP-3R 10mg, ordered by the selling shop's supplier and performed by Optiq Health Labs on September 4, 2026. Reported purity: 99.8%. Net content: 9.87 mg against 10 mg labeled (99% of label). Endotoxins: Pass (LAL, spec ≤ 0.05 EU/mg). Batch BTCH-PE-99-334. Sample source: supplier-provided. Certificate of analysis attached.

Related lab tests

4 tests

The 1,544 other Retatrutide tests on Peptigrity have a typical purity of 99.80%. This one is 99.8%.

Community discussion

0 comments · ♡ 0 likes

Join the discussion — sign in to leave a comment on this lab test.

Sign in to comment →

Have you tested this peptide?

Submit your third-party lab test to help the community verify purity claims. Every report is reviewed before publication.