Vilon 20mg lab test from Uther, May 2026
Janoshik Labs tested Vilon 20mg from Uther on May 4, 2026. It measured 99.809% purity and 22.06 mg against 20 mg on the label.
- In the vial
- 22.06 mgThe label says 20 mg, so 10% more.
- Tested by
- Janoshik Labs
- Tested on
- Lot
- VIL020-0419
Confirmed on Janoshik Labs' portal · checked May 4, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
VX25UYD9GXAXSample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 21 Vilon lab tests →Vilon pricesUther reviews and all 259 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.809% | How much of what's in the vial is the target compound |
| Amount in the vial | 22.06 mglabel says 20 mg · 10% more | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 20 mg · Lab measured 22.06 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 10% more means in a syringe
110% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 5.5 mg using the measured mass, against 5 mg on the label — 10% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | 152715 |
|---|---|
| On the lab's portal | ✓ ConfirmedA Peptigrity staff member found this report on the laboratory's own public portal. |
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Submitted via | Shop panel (bulk upload) |
| Counts as | One lab testCounts toward Uther's Trust Score until May 4, 2028. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | @uther 👑 Legend |
Independent HPLC purity analysis of Vilon from Uther, performed by Janoshik Labs on May 4, 2026. Reported purity: 99.809%. Net content: 22.06 mg against 20 mg labeled (110% of label). Tested content exceeds the labeled amount by 10%. Batch VIL020-0419. Sample source: shop-provided. Certificate of analysis attached.
Related lab tests
The 20 other Vilon tests on Peptigrity have a typical purity of 99.80%. This one is 99.809%.

Community discussion