ForumRetatrutide: 1, 2 or 3 mL of BAC water — what do you use, and why? · Retatrutide · 10 replies

Vilon 20mg lab test from BioLongevity Labs, lot 47-3-45951, November 2025

BioRegen tested Vilon 20mg from BioLongevity Labs on Nov 12, 2025. It measured 99.93% purity and 20.8 mg against 20 mg on the label.

HPLC purity
99.93%
✓ Excellent
Excellent means 98% or higher.
In the vial
20.8 mgThe label says 20 mg, so 4% more.
Tested by
BioRegen
Tested on
Lot
47-3-45951
See the certificate ↓

Not checked on BioRegen's portal

This certificate carries no lookup code. BioRegen has a public portal, so a report with a code can be looked up there.

BioRegen's site says: “Enter the certificate number and validation key printed at the top of the certificate; no account is needed. Older endotoxin and pH reports print a report ID, which works as the number.”

Sample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →

Test results

what the lab measured
TestResultWhat it tells you
Purity (HPLC)99.93%How much of what's in the vial is the target compound
Amount in the vial20.8 mglabel says 20 mg · 4% moreWhether you get the amount on the label
ContainerWhite lyophilized powder
EndotoxinNot recordedIs it safe to inject? Checks for bacterial toxins
Heavy metalsNot recordedCould there be metal contamination?
SterilityNot recordedIs it safe to inject? Checks for live bacteria or fungi

Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.

What’s in the vial

Label 20 mg · Lab measured 20.8 mg

One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.

What 4% more means in a syringe

104% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 5.2 mg using the measured mass, against 5 mg on the label — 4% more.

Certificate of analysis

Original document
Issued by BioRegen · Nov 12, 2025 · Batch 47-3-45951

About this test

How this certificate was checked

Report number47-3-45951
On the lab's portalNot checkedThis certificate has not been checked against the laboratory's public portal.
What the portal showsThat the report is validBioRegen's portal doesn't show the numbers, so they can't be compared there.
Counts asOne lab testCounts toward BioLongevity Labs' Trust Score until Nov 12, 2027.
Sample sourceShop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself.
Submitted byPeptigrity Team Member 02 · Peptigrity team · filed May 11, 2026
Summary

Independent HPLC purity analysis of Vilon from BioLongevity Labs, performed by BioRegen on November 12, 2025. Reported purity: 99.93%. Net content: 20.8 mg against 20 mg labeled (104% of label). Batch 47-3-45951. Sample source: shop-provided. Certificate of analysis attached.

Other lots of Vilon from BioLongevity Labs

LotTestedLabPurityvs labelLab's portal
47-3-46136May 1, 2026MDx BioAnalytical Laboratory99.63%102% of labelNot checked

Batches this shop has published a certificate for, newest first. A lot whose printed value cannot identify a batch is not listed.

Related lab tests

8 tests

Community discussion

0 comments · ♡ 0 likes

Join the discussion — sign in to leave a comment on this lab test.

Sign in to comment →

Have you tested this peptide?

Submit your third-party lab test to help the community verify purity claims. Every report is reviewed before publication.