Retatrutide 20mg supplier's lab test, lot 2026-06-20, June 2026
Janoshik Labs tested Retatrutide 20mg on Jun 29, 2026. The shop is withheld. It measured 99.85% purity and 23.79 mg against 20 mg on the label.
- In the vial
- 23.79 mgThe label says 20 mg, so 19% more.
- Shop
- Shop withheld
- Tested by
- Janoshik Labs
- Tested on
- Lot
- 2026-06-20
Confirmed on Janoshik Labs' portal · checked Jun 29, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
The portal confirms the certificate. It can't show that a vial you buy from the shop is from this batch — compare the lot on yours.
J2GHCFD95B9QSample source: supplier-provided. The shop's supplier had this batch tested before it reached the shop, and the shop passed the certificate on. How we weigh evidence →
All 1,563 Retatrutide lab tests →Retatrutide prices
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.85% | How much of what's in the vial is the target compound |
| Amount in the vial | 23.79 mglabel says 20 mg · 19% more | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 20 mg · Lab measured 23.79 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 19% more means in a syringe
119% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 5.9 mg using the measured mass, against 5 mg on the label — 19% more.
Certificate of analysis
About this test
How this certificate was checked
| Report number | 169274 |
|---|---|
| On the lab's portal | ✓ ConfirmedA Peptigrity staff member found this report on the laboratory's own public portal. |
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Submitted via | Shop panel (bulk upload) |
| Counts as | Listed for information — supplier-provided, not counted |
| Sample source | Supplier-providedNo vial bought from the shop was tested. If the lot on your vial reads 2026-06-20, this is your batch's certificate. Supplier certificates are listed for information and don't count toward the Trust Score. |
| Submitted by | The shop |
HPLC purity analysis of Retatrutide, ordered by the selling shop's supplier and performed by Janoshik Labs on June 29, 2026. Reported purity: 99.85%. Net content: 23.79 mg against 20 mg labeled (119% of label). Tested content exceeds the labeled amount by 19%. Batch 2026-06-20. Sample source: supplier-provided. Certificate of analysis attached.
Related lab tests
The 1,561 other Retatrutide tests on Peptigrity have a typical purity of 99.80%. This one is 99.85%.

Community discussion