KPV 10mg lab test from Snap Peptides, June 2026
Kovera Labs tested KPV 10mg from Snap Peptides on Jun 30, 2026. It measured 99.53% purity and 8.89 mg against 10 mg on the label.
- In the vial
- 8.89 mgThe label says 10 mg, so 11% less.
- Tested by
- Kovera Labs
- Tested on
- Lot
- SP26-KPV10-02
Confirmed on Kovera Labs' portal · checked Jun 30, 2026
Peptigrity looked this report up on the lab's own site and it's there. You can check it too.
AR0VXTGSample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 304 KPV lab tests →KPV pricesSnap Peptides reviews and all 16 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.53% | How much of what's in the vial is the target compound |
| Amount in the vial | 8.89 mglabel says 10 mg · 11% less | Whether you get the amount on the label |
| Endotoxin | ≤ 0.5 EU/mL · pass | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | As, Cd, Pb, Hg — all Negative | Could there be metal contamination? |
| Container | Lyophilized Powder / Clear Purple Cap / Silver Crimp | |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: sterility. It may still be on the certificate below. If it isn't there either, this test says nothing about it.
What’s in the vial
Label 10 mg · Lab measured 8.89 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 11% less means in a syringe
89% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.2 mg using the measured mass, against 2.5 mg on the label — 11% less.
Certificate of analysis
About this test
How this certificate was checked
| Report number | KVR-2026-F423E3 |
|---|---|
| On the lab's portal | ✓ Confirmed Aug 14, 2026A Peptigrity staff member found this report on the laboratory's own public portal.date taken from the record, not from a logged check |
| Checked by | Peptigrity staff, against the lab's portal |
| What the portal shows | That the report is validKovera Labs' portal doesn't show the numbers, so they can't be compared there. |
| Counts as | One lab testCounts toward Snap Peptides' Trust Score until Jun 30, 2028. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | Peptigrity Team Member 02 · Peptigrity team · filed Aug 14, 2026 |
Independent HPLC purity analysis of KPV from Snap Peptides, performed by Kovera Labs on June 30, 2026. Reported purity: 99.53%. Net content: 8.89 mg against 10 mg labeled (89% of label). Tested content is 11% below the labeled amount. Endotoxins: Pass (≤0.5 EU/mL). Heavy metals: As, Cd, Pb, Hg — all Negative. Batch SP26-KPV10-02. Sample source: shop-provided. Certificate of analysis attached.
Related lab tests
The 302 other KPV tests on Peptigrity have a typical purity of 99.69%. This one is 99.53%.

Community discussion