Ipamorelin 10mg lab test from Penguin Peptides, January 2026
Janoshik Labs tested Ipamorelin 10mg from Penguin Peptides on Jan 21, 2026. It measured 99.626% purity and 8.61 mg against 10 mg on the label.
- In the vial
- 8.61 mgThe label says 10 mg, so 14% less.
- Tested by
- Janoshik Labs
- Tested on
Not checked on Janoshik Labs' portal
This certificate carries no lookup code. Janoshik Labs has a public portal, so a report with a code can be looked up there.
Sample source: shop-provided. The shop chose and sent this vial. How we weigh evidence →
All 471 Ipamorelin lab tests →Ipamorelin pricesPenguin Peptides reviews and all 51 lab tests
Test results
| Test | Result | What it tells you |
|---|---|---|
| Purity (HPLC) | 99.626% | How much of what's in the vial is the target compound |
| Amount in the vial | 8.61 mglabel says 10 mg · 14% less | Whether you get the amount on the label |
| Endotoxin | Not recorded | Is it safe to inject? Checks for bacterial toxins |
| Heavy metals | Not recorded | Could there be metal contamination? |
| Sterility | Not recorded | Is it safe to inject? Checks for live bacteria or fungi |
Not recorded for this test: endotoxin, heavy metals and sterility. They may still be on the certificate below. If they aren't there either, this test says nothing about them.
What’s in the vial
Label 10 mg · Lab measured 8.61 mg
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
What 14% less means in a syringe
86% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.2 mg using the measured mass, against 2.5 mg on the label — 14% less.
Certificate of analysis
About this test
How this certificate was checked
| On the lab's portal | Not checkedThis certificate has not been checked against the laboratory's public portal. |
|---|---|
| What the portal shows | That the report is validJanoshik Labs' portal doesn't show the numbers, so they can't be compared there. |
| Counts as | One lab testCounts toward Penguin Peptides' Trust Score until Jan 21, 2028. |
| Sample source | Shop-providedThe Trust Score counts it like any other published test; who sourced the vial is shown so you can weigh it yourself. |
| Submitted by | Peptigrity Team Member 02 · Peptigrity team · filed Mar 10, 2026 |
Independent HPLC purity analysis of Ipamorelin from Penguin Peptides, performed by Janoshik Labs on January 21, 2026. Reported purity: 99.626%. Net content: 8.61 mg against 10 mg labeled (86% of label). Tested content is 14% below the labeled amount. Sample source: shop-provided. Certificate of analysis attached.
Related lab tests
The 470 other Ipamorelin tests on Peptigrity have a typical purity of 99.78%. This one is 99.626%.

Community discussion